Kkeut Korean Medicine Clinic's Approach to Onda Lifting

1. Pre-Procedure Design and Handpiece Strategy Formulation

Before performing Onda Lifting, the director thoroughly analyzes the patient's facial structure.

Considering areas with reduced skin elasticity, areas requiring volume improvement, and areas needing contour refinement, we plan the application zones for 3mm and 7mm handpieces.

We avoid treating areas where cheek hollowing is a concern and deliver sufficient thermal energy to areas requiring elasticity improvement, anticipating positive results along with procedure safety.

2. Customized Energy Settings for Each Individual

The cumulative amount of total energy delivered during Onda Lifting can significantly influence the procedure's outcome.

At our clinic, when treating facial areas, we adjust and apply the appropriate amount of energy, ranging from approximately 60,000 to a maximum of 120,000 joules, tailored to each individual's skin condition.

Rather than simply irradiating a large amount of energy, we plan an appropriate energy range according to the patient's skin thickness, fat distribution, and desired contours.

3. Handpiece Movement Speed Control Technique

The results of the Onda device procedure can vary depending on the handpiece movement method.

At our clinic, in areas where thermal energy needs to accumulate sufficiently, we slow down the handpiece speed to induce an effective response,

Conversely, in sensitive areas or areas where epidermal temperature can easily rise, we adjust to a faster speed to prevent excessive heat accumulation.

Such delicate adjustments require the medical staff's skilled technique for stable procedure results.

4. Shot Distribution Plan by Area

Even when using the same handpiece, the composition of shots required for each patient may be applied differently.

For individuals with less facial fat, we primarily utilize the 3mm handpiece for treatment planning,

For individuals with a double chin or excess fat in the lower jaw area, we increase the proportion of the 7mm handpiece, focusing on overall contour refinement.

Rather than simply considering the total number of shots, we prioritize delivering energy to the necessary areas at the appropriate depth when performing the procedure.

Delicate Adjustment of Onda Lifting Procedure Method

At our clinic, rather than directly applying 90W output from the initial stage of Onda Lifting,

we apply a method of rapidly increasing the target tissue temperature with a high output of 100-110W, then maintaining a stable temperature at 90W.

This procedure method allows us to anticipate several positive changes.

Shortened Time to Reach Reaction Temperature

By starting the procedure with high output from the beginning, the target tissue can quickly reach the required temperature.

Therefore, even if the total energy irradiation is the same, the point at which skin tissue shows an actual response can be advanced.

Improved Efficiency of Key Reaction Zones

Heating with high output for a short period makes it easier to reach the desired target temperature before thermal energy dissipates to surrounding tissues,

This allows for effectively inducing a response centered on the dermis and fat layers while minimizing epidermal damage.

Reduced Procedure Time and Enhanced Efficiency

If the procedure were performed with only 90W output, it could take longer for the tissue to reach the reaction temperature, and the irradiation amount might also increase.

On the other hand, starting with high output can shorten the procedure time while quickly achieving the necessary thermal energy,

and then adjusting the output helps maintain the safety of the procedure.

Patient-Perceived Treatment Experience

• Immediately after the procedure, patients can more clearly feel a sensation of skin tightening and firming.
• Since the tissue reaction point is faster, you can experience post-procedure changes relatively early.
• Adjusting the output before excessive heat sensation builds up can help reduce discomfort from pain.

Even when irradiating the same total energy of 60,000 joules, the procedure results can vary depending on the output strategy used.

At our clinic, we strive to achieve positive procedure results through this meticulous approach.

Characteristics of Onda Lifting

Onda Lifting is performed using microwave energy at a frequency of 2.45GHz. This energy is absorbed by the dermal and fat layers, generating heat in the treated area.

This is similar to how water molecules are heated in a microwave oven. Water molecules inside the skin vibrate and create heat.

This thermal energy induces collagen contraction and regeneration, while simultaneously destroying fat cells.

Microwaves are characterized by selective absorption, particularly in water-rich layers. Therefore, the possibility of epidermal damage is low.

Since it primarily reacts intensely with the dermal and fat layers, it can reduce the burden of pain or side effects during the procedure.

Onda Lifting is characterized by its ability to provide both a lifting effect that refines facial contours and a tightening effect for improving skin elasticity and texture with a single device.

Onda Lifting Energy Mechanism

3mm Handpiece

This handpiece primarily targets the boundary between the dermal and fat layers. Through collagen contraction and regeneration, an immediate tightening effect can be expected.

As accumulated water in edematous fat decreases, a more refined facial line effect is also observed.

7mm Handpiece

This handpiece delivers energy to deeper fat layers, selectively damaging fat cell membranes.

Damaged fat cells are expelled from the body through lymphatic circulation. Changes in contour begin to appear approximately 2-3 weeks after the procedure, and improved results can be observed around 6 weeks.

Generally, destroyed fat cells do not regenerate, so the altered contours can last for a relatively long time.

Concurrently, heat is also directly delivered to the retaining ligaments, inducing an immediate lifting effect.

Importance of Temperature Control

Collagen actively contracts at temperatures generally ranging from 60 to 65 degrees Celsius.

To stably maintain this temperature, a delicate technique is required where the practitioner slowly moves the handpiece to gradually accumulate heat.

Water Selective Absorption Characteristics

Microwaves generate heat primarily in water-rich layers rather than nerve or blood vessel tissues. This results in less pain during the procedure and allows for a relatively stable treatment.

Other Lifting Treatments to Consider

While we do offer Onda Lifting as a standalone treatment at our clinic,

when combined with treatments like Shurink (targeting the SMAS layer) or Oligio (radiofrequency tightening), even more effective synergistic results can be expected.

Performing treatments simultaneously on the same day can lead to effective heat accumulation, which can help increase overall satisfaction with the treatment results.

Our Medical Team's Treatment Philosophy

Our medical institution frequently performs Onda Lifting treatments;

however, since no two faces are exactly alike, treatment plans are meticulously tailored to each individual.

Even after the procedure, we continuously strive to find ways to deliver even more satisfying lifting results.

We go beyond simply utilizing the device's functions;

we believe that true lifting treatment involves a deep understanding of the skin's texture and changes in facial contours, and delicately designing the treatment approach accordingly.

We approach Onda Lifting with the philosophy that it is not merely a mechanical operation, but rather a treatment perfected by the practitioner's skilled design and meticulous touch.

Principle of Onda Lifting's Immediate Effect

Onda Lifting directly delivers microwave energy to layers at depths of 3mm and 7mm,

causing collagen fibers to rapidly reach a temperature of approximately 65 degrees Celsius. This results in an immediate contraction response of collagen.

Thanks to this collagen contraction process, it is common for lifting effects to be visually apparent immediately after the treatment.

This treatment is especially recommended for those who prefer immediate changes and find long waiting periods burdensome.

Our Clinic's Onda Lifting Treatment Protocol

1. Pre-Treatment Custom Design and Strategy Formulation

Before the treatment, our medical team thoroughly analyzes the patient's skin condition, fat distribution, patterns of volume and elasticity loss, and ideal lifting directions. Based on this, plans are made for using the 3mm and 7mm handpieces tailored to each facial area.

Onda Lifting treatments are then performed based on this individualized custom design.

2. Individual Energy Settings

Energy is adjusted from 60,000 joules to over 120,000 joules, tailored to the patient's condition.

Sufficient time is secured for the procedure, and cooling methods to prevent skin overheating are also considered.

3. Procedure Speed and Heat Accumulation Management

Considering the equipment's characteristic emphasis on heat accumulation, the speed is slowly adjusted initially to gradually raise skin temperature.

Subsequently, the speed is increased to prevent excessive heat accumulation on the skin surface.

4. Handpiece Types and Shot Distribution Strategy

There are individual differences, such as those with abundant cheek fat, those primarily concerned with loss of elasticity, or those with relatively thick fat layers.

Based on the unique characteristics of each patient, different ratios of 3mm and 7mm handpieces are applied.

5. Director-Led Procedure Design

Although many Onda Lifting procedures are performed daily, each patient's design is uniquely tailored.

We continuously research handpiece combinations and energy settings for more satisfying results.

The effectiveness of Onda Lifting can vary not only based on the equipment itself but also on the procedure design.

Candidates for the Procedure

1. It may be suitable for those who need improvement for a double chin, jowls, or jawline definition.
2. Those concerned with nasolabial folds and mid-face sagging may also consider it.
3. Even those who did not see expected improvement from previous lifting procedures are advised to decide after consultation.
4. It can be recommended for patients in their 30s to 50s who need both fat reduction and elasticity improvement.
5. It can be a good option for those who desire quick changes without the burden of a recovery period.

Advantages of the Procedure

1. Its powerful cooling function can help reduce the discomfort of pain.
2. You can expect a tightening sensation in the skin immediately after the procedure.
3. You can return to your daily life immediately after the procedure.

Procedure Steps

STEP 01. Thorough cleansing, followed by a 1:1 specialist consultation

STEP 02. Oil application.

STEP 03. Begin the Onda Lifting procedure.

Post-Procedure Precautions

• Cleansing and makeup are possible from the day of the procedure.
• It is advisable to refrain from saunas, jjimjilbangs (Korean bathhouses), alcohol, and smoking for about one week after the procedure.
• Due to the sensation of heat, your skin may feel dry, so please apply plenty of moisturizer.
• When going out, please diligently apply sunscreen to protect your skin.