Skin Booster Layering Procedure Process

1. Pre-Procedure Preparation and Cleansing

- Cooling or anesthetic cream is applied as needed.

Skin Booster 4-Step Layering Program

2. Skin Booster 4-Step Layering (MTS or Secret RF Procedure)

Step 1: Skin Booster Ampoule Application

- The ampoule is thinly applied to the entire skin to provide a priming effect.

- This step induces a skin reaction in the epidermal layer.

Step 2: Skin Booster Ampoule Application

- After shallow needling targeting the epidermal layer, the ampoule is applied.

Step 3: Skin Booster Ampoule Application

- After needling targeting the basement membrane at the dermal-epidermal junction, the ampoule is applied.

Step 4: Skin Booster Ampoule Application

- After needling focusing on areas of concern such as pores or scars, the ampoule is applied.

3. Post-Procedure Soothing Care

- The procedure concludes with soothing care using a Jaundo modeling pack or similar.

During a single procedure, skin boosters are applied in a 4-step layering method, helping active ingredients to be absorbed widely and evenly.

The Skin Booster layering program focuses on reducing the likelihood of bruising, swelling, incorrect drug injection, and hypersensitivity reactions.

Layering Techniques for Skin Booster Absorption

JuveLook ingredients may be difficult to absorb into the skin through simple topical application alone.

Accordingly, we utilize MTS (Microneedle Therapy System) and needle radiofrequency (Secret RF) devices to apply skin booster layering absorption techniques.

JuveLook skin boosters have a particle size of approximately 30-50μm and can be absorbed through MTS or Secret RF. At this time, layering techniques are used to reduce potential drug loss that may occur with simple topical application.

Layering Technique Using MTS

MTS creates microscopic channels of approximately 150μm in the skin, forming pathways for skin booster ingredients to be well absorbed.

During an MTS procedure, a 4-step layering process is used to enhance skin booster absorption.

1. Epidermal Layer Priming Application

2. Shallow Needling Followed by Epidermal Layer Target Application

3. Dermal-Epidermal Junction Target Application

4. Customized Target Application for Concentrated Areas (Pores, Scars, etc.)

After the procedure, it is concluded with soothing care such as a Jaundo modeling pack, reducing the burden of inflammatory reactions.

Secret RF Needle Radiofrequency Layering Technique

Secret RF creates channels approximately 180μm in size and contracts these pathways with radiofrequency heat. This reduces fluid reflux (overflow) that can occur during typical needle procedures, helping JuveLook ingredients to be absorbed relatively uniformly into the dermal layer.

Compared to manual injection methods, there may be a possibility of drug loss, but the focus is on uniformly delivering active ingredients to the desired target layer, the dermis. The reduction in pain and the ability to achieve even absorption are also considered benefits.

Similar to MTS procedures, Secret RF also allows for needle depth adjustment and is applied using a 4-step layering technique.

Considering the patient's individual skin condition, MTS and Secret RF procedures can be appropriately combined.

Necessity of Such Layering Procedures

JuveLook is originally a skin booster provided in powder form.

Therefore, it requires a process of thoroughly dissolving it in saline solution to stabilize its viscosity before use.

If administered via manual injection, insufficient hydration or improper depth control can lead to the formation of nodules due to drug clumping.

Furthermore, if the drug is injected into the subcutaneous fat layer instead of the target dermal layer, it may be difficult to achieve the expected improvement effects.

Even with the most delicate injection procedures, completely eliminating the possibility of nodule formation is challenging. Therefore, we carefully explore treatment options to minimize patient burden and ensure satisfactory results.

At our clinic, we consider everything from the drug hydration process to viscosity control, ensuring proper delivery pathways within the skin, and absorption methods. We apply layering techniques tailored to each patient's individual skin condition and needs to ensure accurate drug delivery.

We believe it is important to pursue methods that maximize treatment efficacy while minimizing the burden of side effects.

What is Juvelook Skinbooster?

Juvelook is a skin booster containing both PDLLA (Poly-D,L-lactic acid) and Hyaluronic Acid (HA).

It can help address concerns such as skin texture, pores, fine lines, and acne scars. It is a regenerative treatment that induces the production of autologous collagen and elastin in the dermis, contributing to overall skin elasticity and density improvement.

PDLLA has smaller particles compared to existing PLLA components (e.g., Sculptra), allowing for better absorption into the skin. This design relatively lowers the possibility of inflammatory reactions or nodule formation, making it a suitable option even for those with sensitive skin.

Juvelook consists of the following components:

PDLLA 42.5mg (Autologous collagen regeneration-inducing ingredient)

Non-crosslinked Hyaluronic Acid 7.5mg (Moisture supply and skin barrier improvement)

When injected into the dermal layer of the skin, PDLLA activates fibroblasts, helping to produce collagen and elastin fibers.

Collagen is a key component influencing skin thickness and density, while elastin affects the maintenance of elasticity.

An increase in both these fibers can contribute to the improvement of fine lines, pores, and reduced elasticity.

Furthermore, PDLLA can induce the differentiation of new fibroblasts through stem cell stimulation.

This means it can improve existing aged cellular structures and aid in the regeneration of the skin structure itself.

As we age, the generation of new fibroblasts, which produce collagen and elastin fibers, can decrease.

Juvelook Skinbooster helps generate new fibroblasts in place of existing aged ones, thereby supporting long-term collagen and elastin fiber production.

Recommended For

• 01. Those concerned about decreased skin elasticity or enlarged pores.
• 02. Those worried about pore size or acne scars.
• 03. Those seeking natural volume improvement without overdoing it.
• 04. Those bothered by uneven skin texture or fine lines.
• 05. Those who desire autologous collagen regeneration but are hesitant about injection procedures.
• 06. Those who wish to achieve natural, healthy skin tightening and lifting effects.

What is the Clinical Basis of Juvelook?

The efficacy of PDLLA for dermal regeneration has been confirmed through several studies.

A study by Kwon et al. (Dermatologic Surgery, 2022) reported observing increased skin thickness and improved dermal density and elasticity when PDLLA skin booster was administered a total of 3 times at 4-week intervals.

A study by Kim et al. (Journal of Cosmetic Dermatology, 2021) confirmed that PDLLA can also influence elastin production. This demonstrates its potential to contribute not only to collagen regeneration but also to complex fiber regeneration.

A study by Han et al. (Lasers in Surgery and Medicine, 2020) stated that when administered to acne scar patients via MTS, the drug could be effectively delivered to the dermal layer with relatively fewer epidermal irritations and side effects.

A Message from Our Head Doctor

Many first-time visitors to our clinic often experience significant distress over skin texture issues alone.

Typical concerns include makeup not adhering well due to visibly enlarged pores or rough skin texture.

While these issues may not be apparent to others, they can cause considerable stress for the individual.

For those with these concerns, we recommend considering the Juvelook treatment.

This treatment can help smooth skin texture and improve pores, and it has the advantage of supporting the skin to activate its natural regenerative capabilities.

If you usually worry about pain during injection procedures or are concerned about drug loss,

consulting us about Juvelook Skinbooster treatment with our layering technique might be a good option.

Treatment Benefits

• 01. A composite ingredient of high-molecular PLA and hyaluronic acid approved by the U.S. FDA, which can help with various skin concerns.
• 02. Induces autologous collagen production, allowing for gradual and natural improvement over time after treatment.
• It can help increase skin elasticity and smooth skin texture. Additionally, positive effects can be expected in reducing fine lines and acne scars.
• Biodegradable and bioabsorbable materials are used. After a certain period, they naturally break down and are excreted from the body without leaving any residue.