Ellysis Needle RF Treatment

To ensure that even if the sensation is similar, the scope of improvement can be wider. This is Kkeuthan Clinic's treatment philosophy.

Ellysis RF is a treatment that delivers high-frequency energy to the dermal layer by closely applying micro-needles to the skin.

It operates on a similar principle to other needle RF treatments such as Potenza, Secret, and Virtue. However, Ellysis is characterized by its ability to selectively adjust 1MHz and 2MHz frequencies, and its application of 49-pin non-insulated and dual-depth insulated structures.

Therefore, it can be seen as a needle RF treatment that can help improve various skin problems simultaneously with a single procedure.

Factors Kkeuthan Clinic Considers for Ellysis RF Treatment

1) Non-Insulated 49-Pin Tip: Increased stimulation density and area compared to a typical 25-pin tip

This is a non-insulated tip considered for improving pores or acne scars.

With a single treatment action, more electrodes deliver energy widely and densely to the dermal layer of the skin. 

This can increase the density of micro-coagulation zones, positively influencing the improvement of pores and skin texture.

As a result, more effective valid stimulation can be expected compared to treatment time or sensation.

2) Insulated Dual-Depth (2-depth) Structure: Continuous irradiation at two depths with a single needle insertion

This is an insulated tip considered for improving fine wrinkles or lifting.

While typical insulated tips deliver energy differently to shallow and deep layers, Ellysis insulated tips can continuously irradiate high-frequency energy at two different depths with a single needle insertion.

This helps reduce the burden on the epidermis (shortening recovery time) while simultaneously allowing for remodeling effects through collagen rearrangement in the deeper layers.

3) 1MHz and 2MHz Frequency Selection Function

1MHz (Low-Frequency Range): High-frequency current is easily delivered to the deeper parts of the skin. Therefore, it can help with lifting, elasticity improvement, deep wrinkles, enlarged pores, and improving the base of scars.

2MHz (Relatively High-Frequency Range): Tends to react mainly to the epidermis and upper dermis. It can be usefully applied for improving sebaceous glands, around pores, fine wrinkles, skin surface texture, and redness.

Unlike conventional needle RF treatments, within a single session, 1MHz (depth control) and 2MHz (surface layer control) frequencies can be switched or applied sequentially, enhancing treatment efficiency relative to time.

4) Principle of Quantitative Treatment with 350+ Shots

Based on a typical full-face area, approximately 300 shots are delivered during 2 passes (two treatments). We then apply more than 50 additional shots in key problem areas, conducting the treatment with a minimum of 350 shots.

Considering Ellysis's 49-pin and dual-depth structure, even greater improvement results can be expected relative to the stimulation received during treatment. Through this, we design treatments aiming for more effective results with similar stimulation.

5) Overlap Design (Superimposition) and Skin Booster Combination After Precise Diagnosis

Using the Mark-Vu diagnostic device, we precisely measure skin conditions such as sebum, pores, wrinkles, pigmentation, and redness. For areas with complex issues like pores and scars, or sebum and redness, 2MHz (surface and upper dermis) and 1MHz (deep dermal layer) frequencies can be applied sequentially to the same spot.

Following this, a personalized skin booster layering method (Step 1 → Step 2 → Step 3) is applied to help increase the absorption rate and synergistic effects of active ingredients.

Kkeuthan Clinic's Treatment Process

1) Precise Skin Analysis and Diagnostic Map Creation Using Mark-Vu

Acne: By closely identifying sebaceous gland activity, residual inflammation, and redness distribution, we plan treatment by combining a non-insulated tip (sebum/pores) + 2MHz frequency (redness).

Acne Scars: We categorize types such as boxcar, rolling, and red scars, and then apply a superimposed treatment of 1MHz frequency (deep layer) + non-insulated tip (surface resurfacing).

Considering various skin concerns and the characteristics of lesions, we distinguish between frequencies (Hz) and tips (non-insulated/insulated) to provide personalized treatments.

2) Shot and Pass Design — Based on a Minimum of 350 Shots

For the entire face area, 2 passes typically correspond to approximately 300 shots.

For key problem areas, more than 50 additional shots are overlapped.

1MHz and 2MHz are switched and used according to the treatment area and lesion characteristics.

3) Application of 3-Step Skin Booster Layering

Step 1 (Surface Layer): Focuses on improving surface layer problems such as pores, pigmentation, and redness.

Step 2 (Dermal Layer): Focuses on inducing collagen production for the improvement of fine wrinkles and scars.

Step 3 (Intensive Overlap): More intensively irradiates areas with complex concerns and effectively penetrates highly concentrated active ingredients.

4) Overlap Design by Problem Type (Example)

Pores and Acne: This method involves first applying a non-insulated 49-pin tip + 2MHz frequency (for sebum secretion and surface texture improvement), followed by an insulated 1MHz frequency (for deep layer improvement) in sequence.

To manage scars × redness simultaneously, one can consider using an insulated 1MHz frequency for deep areas and a 2MHz frequency to stabilize areas of redness.

For fine lines × acne scars, there is a method of utilizing a 2MHz frequency to improve fine lines and skin surface texture, and evenly caring for the entire upper dermis with a non-insulated 49-pin tip.

We will explain the Principle of Ellysis RF Laser Treatment.

Needle RF treatment is a process that delivers high-frequency energy to the desired depth of the skin layer through micro-needles, thereby restructuring the skin's architecture.

In the areas where high-frequency energy is applied, micro thermal coagulation zones can be formed.

These coagulation zones stimulate fibroblasts within the skin, helping to induce the regeneration of collagen and elastin.

The non-insulated method delivers energy over a wide range from the epidermis to the upper dermis, while the insulated method is characterized by precisely stimulating a specific target layer.

Ellysis's Dual Depths Insulated technology can deliver energy to two different depths with a single needle application, thereby reducing the burden of recovery time and contributing to structural changes in the skin.

What is Ellysis Sense RF? (Equipment & Tip Description)

The non-insulated 49-pin tip emits heat from the entire needle, stimulating widely and uniformly from the skin surface to the upper dermis. This can offer benefits for pore reduction, sebum control, and the improvement of superficial scars. The 49-pin tip is known to deliver more effective stimulation per shot than the typical 25-pin tip.

The insulated Dual Depths tip generates heat only at the needle tip and continuously applies energy to two different depths with a single insertion. This method focuses on protecting the epidermis while assisting with the remodeling of deeper skin layers.

The variable-length needle, similar to Agnes treatment, allows for depth adjustment in 0.x mm increments according to skin thickness or treatment area. This makes it possible to selectively target specific tissues such as sebaceous glands, sweat glands, and under-eye fat.

After the treatment, here are the changes you can expect.

1) It can help with skin lifting and improved elasticity, as well as the reduction of deep or shallow wrinkles.

2) You can expect the effect of reduced pores and balanced sebum secretion, leading to a refined skin surface texture.

3) It can help improve various types of acne scars, such as indented acne scars or red marks.

4) It can help alleviate facial redness and contribute to a more even overall skin tone.

5) You can expect an improvement in hyperpigmentation conditions, such as reducing the likelihood of melasma recurrence.

We recommend this treatment for those who:

1) Have rolling or boxcar indented scars, or acne scars accompanied by red marks.

2) Have large pores and rough skin texture, or skin with excessive sebum secretion leading to frequent breakouts.

3) Are concerned about fine lines or have diminished skin elasticity.

4) Have redness and sensitive skin, or experience recurrent hyperpigmentation.

5) Desire visible changes with fewer treatment sessions compared to other needle RF procedures, and are interested in shot efficiency and frequency matching technology.

The treatment proceeds with the following steps:

1) First, after cleansing, your skin condition will be photographed. This is followed by an initial consultation using Mark-Vu and a final consultation with the director.

2) The treatment area is designed according to your individual skin condition, and detailed parameters such as depth, output, mode, passes, overlap, and frequency are set.

3) The Needle RF treatment is meticulously performed in two passes with over 350 shots, and areas of particular concern are overlapped for intensive care.

4) If skin improvement is needed, skin booster layering techniques from stage 1 to 3 can be applied concurrently.

5) After the treatment, a Jaungo modeling mask is used to soothe any heat sensation on the skin.

Information about precautions and possible side effects you should be aware of before treatment.

Erythema and swelling usually subside within 6 hours, but may last for about 2-3 days depending on the individual.

Fine scabs may form; please allow them to fall off naturally and do not pick at them.

For 3-4 days after the treatment, it is recommended to avoid saunas, jjimjilbangs (Korean bathhouses), swimming, alcohol, smoking, and strenuous exercise.

Adequate use of sunscreen, sufficient moisturizing care, and consistent hydration are crucial for recovery.

Temporarily, in the treated area, trouble, itching, stinging, or bruising may occur.